Dispenser Functional Description
Currency Containers
NCR 5635 Spray Currency Dispenser Service Manual
1-5
NCR - CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
The Cassette Lid
1
The cassette lid hooks into locating slots at the front of the body and
is latched at the rear. A bank seal can be used to secure the latch.
The Cassette Body
1
The cassette body holds the stack of currency under pressure from a
spring-loaded pusher mechanism. The front of the cassette is
formed by a roller type truck door which is opened only when the
cassette is inserted into the dispenser pick module. As notes are
taken from the stack at this open end the pusher moves towards the
front. A magnet attached to the pusher operates a reed switch in the
pick module to signal a low currency condition when the stack has
almost all been dispensed.
Other magnets, under a cover on the side of the cassette, in
combination with reed switches on the pick module, produce a
binary code that is used to identify the cassette type to the dispenser
software, and, therefore, the value of the currency it contains. A
cassette can be put in a pick module in any position and its type will
be recognised from the magnet code. More than one cassette of a
particular type can be installed. The dispenser treats all cassettes
with the same type as one logical cassette.
master.bk Page 5 Wednesday, March 27, 2002 9:35 AM
