Maintenance Instructions
Adjustments
NCR 5635 Spray Currency Dispenser Service Manual
4-41
NCR - CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
Aria Double Pick Module Pick Unit Relationship
4
When the internal timing of both pick units of the double pick
module has been set, the pick units have to be locked in a fixed
timing relationship. Proceed as follows:
1
Turn the gear train of the upper pick unit to move the timing
disk in a clockwise direction until the 1 timing mark on the
drive cluster timing disk lines up with the timing sensor body.
Caution
Always turn the gear train in its normal direction of travel. The pick
timing disks should rotate clockwise. Do not move the gear train
backwards and forwards.
2
Turn the gear train of the lower pick unit until the 2 timing
mark on the drive cluster timing disk lines up with the timing
sensor body.
3
Place the timing belt (removed in the procedure “Separating the
Pick Units of the Aria Double Pick Module”) around the pulley
wheel of the lower pick position and put it on as many teeth as
possible of the pulley wheel of the upper pick position, taking
care not to dislodge the settings. Turn the upper gear train in
the normal direction of travel (see Caution above) to ride the
timing belt fully on to the pulley wheel.
Assembling Aria Pick Modules to the Presenter
4
Once the pick modules have been prepared, as in the previous
procedures, the pick modules can be assembled with a 5635 spray
presenter to produce the complete currency dispenser. There are no
timing adjustments to the spray presenter.
Warning
The dispenser is heavy. Get help to lift it.
master.bk Page 41 Wednesday, March 27, 2002 9:35 AM