Maintenance Instructions
Adjustments
4-40
NCR 5635 Spray Currency Dispenser Service Manual
NCR - CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
looking from the currency cassette). See the following
illustration:.
Note The above illustration shows the Aria double pick module but
can also be used to identify the gear on the Aria single pick module.
3
Turn the gears of the pick module transport until the pick D
wheel is free of its mating tension wheel.
4
Turn the drive cluster in a clockwise direction until the D
timing mark on the timing disk lines up with the timing sensor
body.
5
Turn the gears of the pick module transport until the
interrupted part of the pick D wheels is away from the pick
arms. Turn the gears until a gap of 0.5 mm 0.5 mm
(0.02 in. 0.02 in.) exists between the leading edges of the pick
D wheels and the tension wheels as shown in the first figure
above.
6
Replace the idler gear removed in step 2. Be careful not to
dislodge the setting.
7
On a double pick module carry out steps 1 to 6 on the lower
pick unit.
±
±
master.bk Page 40 Wednesday, March 27, 2002 9:35 AM
