NBK EPU-100-W5-R60, Инструкция по эксплуатации

Страница: 19 / 32

18
4 Installation and Connection
■If installing the unit-using the lock adapter (optional)
Assemble the unit with a lock adapter enables positioning
misalignment due to equipment vibration, external force, or dead
weight in vertical use to be prevented.
1. Connect the antenna.
> P.16
2. Mount the lock adapter to the unit.
Align the output shaft of the unit with phase of the D-cut surface
hole on the input side of the lock adapter and insert. Match
each spigot part and assembly the unit and lock adapter in
parallel with each other.
3. Mount at the install location.
Hold the unit with the lock adapter in place and secure the unit
to the partner device using hex socket head bolts.
※ Hex socket head cap screws and couplings are not provided.
Output Shaft
Input side D-cut
surface
Spigot receiver
Unit
Lock Adapter
Couplings
Equipment side
mounting part
Equipment side
mounting part
Mounting hole
(M4)
Spigot receiver
Hex socket head cap screw (M4)
Hex socket head cap screw (M3)
Mounting hole (M4)
Spigot receiver
Unit
Unit
Couplings
Lock Adapter
Lock Adapter