Getting Started with MAXserver Access Servers
0038
37
Logging in to the Access Server
When your terminal is properly connected to the unit, turn its power ON,
then press <RETURN> (or ENTER) a few times -- until the unit recognizes
the terminal. When the unit responds, you see the following message on
your screen:
WELCOME TO THE XYPLEX ACCESS SERVER.
ENTER USERNAME>
Type your name, your initials, or a nickname, then press <RETURN>.
You can type up to 16 characters (numbers or letters). This name is your
identifier during this session. If you choose, you can change this information
each time you make a connection. It will be shown whenever you or any
other person on the network requests information about who is connected to
the unit.
After you enter your username, the unit returns the local command prompt:
XYPLEX>
To allow the system administrator to modify server and port settings, you
must be in privileged mode. To enter privileged mode, use the following
command:
XYPLEX> SET PRIVILEGED
The password prompt displays. Enter the default password “SYSTEM”. The
password is not case-sensitive.
PASSWORD> SYSTEM
Now the following prompt displays, which indicates you are now in
