Navvis VLX Скачать руководство пользователя страница 181

Страница: 181 / 194

Warnings and Err

arnings and Errors

ors

Licensing errors

The following license errors may display when checking for NavVis System Software updates in
the command line interface:



NOTE:

If one of the following errors appears on the NavVis device, the INST

INSTALL

ALL will be

disabled.

▪

404 Not found

404 Not found appears if the NavVis device tries to access a non-existing software
repository.

▪

403 F

403 Forbidden

orbidden appears if the NavVis device tries to access another existing software

repository, but with the same login credentials.

▪

401 Unauthoriz

401 Unauthorized

ed appears when the login credentials for the NavVis device are invalid.

Warning Types

If the mobile scanning system detects a problem, a notification, warning, or error is displayed.

Warnings can be resolved by the operator without stopping the current mapping, while errors
cannot be resolved without restarting the mapping.

The following warning messages can appear during mapping:

Code

Description

WARN_L

ARN_LASER_HORIZ_INV

ASER_HORIZ_INVALID_MEAS

ALID_MEAS

Message

Message: Please move the front of the
device towards the closest (< 30m) wall.

Cause:

Cause: The Horizontal Laser is not
acquiring enough close points for a stable
and consistent localization of the device.

WARN_SY

ARN_SYSTEM_L

STEM_LO

OAD_HIGH

AD_HIGH

Message

Message: Please slow down or pause the
mapping for a while.

Cause:

Cause: The system has a high
computation usage. This can be due to a
long mapping time. To achieve best
results, the system should not work at full
capacity.

NavVis VLX

vVis VLX

User Guide

179

Содержание VLX



































































































































































































Результаты поиска

Содержание VLX

Отзывы:

Navvis VLX, Руководство пользователя, Страница: 181 / 194

Результаты поиска

Содержание VLX

Отзывы: