Navvis VLX Скачать руководство пользователя страница 151 | Manualshive

Страница: 151 / 194

Navvis VLX Скачать руководство пользователя страница 151

Maintenance Ser

Maintenance Service and Repairs

vice and Repairs

Maintenance Ser

Maintenance Service

vice

Additional to regular care of your device as described in Caring for your device ,NavVis
recommends having your device professionally serviced every one to two years. Each service
consists of an inspection for any potential damage, a check for any defects and subsequent
repair, as well as a re-calibration.



NOTE:

Update the NavVis System Software (refer here) regularly for best performance.

Scheduling

All services will either be executed at an official NavVis office or with assistance of technically
trained NavVis staff.

Services can only be booked with your local NavVis reseller or NavVis Support at NavVis Support
, if purchased directly.

The following would indicate that the device requires a service sooner than every one or two
years:

▪

The device is used daily.

▪

The surface of the cameras or laser sensors are scratched.

▪

The device was involved in a severe crash or multiple bumps leaving marks and scratches.

▪

The device is regularly exposed handling of air freight.

▪

The device is regularly exposed to extreme environments (dust, heat, or high humidity).

If you are not sure NavVis Support will advice you or your local NavVis reseller on the need for
professional maintenance.

Calibration

Regularly having your NavVis VLX re-calibrated ensures that the device will perform at the
highest accuracy and quality as shown in the specifications on this User Guide, refer here for
specifications.

A service including re-calibration can only be executed at the NavVis headquarters in Munich,
Germany. There is no objective calibration verification available without having the device at this
location.

The latest calibration date and version of your NavVis VLX is marked on a black and white
sticker attached to the device.

Na

NavVis VLX

vVis VLX

User Guide

User Guide

149

149

«
...
149
150
151
152
153
...
»

Содержание VLX



































































































































































































Отзывы:

Нет отзывов