NavLinkz VL1-TOM, Руководство пользователя

Страница: 6 / 20

Version 08.08.2022 HW: 16 (V65) VL1-TOM
P
a
g
e
6
2. Installation
To install the interface, first switch off the ignition and disconnect the vehicle’s battery.
Please read the owner`s manual of the car, regarding the battery`s disconnection! If
required, enable the car`s Sleep-mode (hibernation mode)
In case the sleep-mode does not succeed, the disconnection of the battery can be done
with a resistor lead.
If the necessary stabilized power supply for the interface is not taken directly from the
battery, the chosen connection has to be checked for being constantly stabile.
The interface needs a permanent 12V source!
2.1.
Place of installation
The interface box is prepared to be connected behind the vehicle`s monitor. The monitor
has to be removed for the installation