Version 08.08.2022
HW: 16 (V65)
VL1-TOM
P
a
g
e
5
1.4.
Dip-switch settings – interface
Some settings have to be selected by the dip-switches on the
video interface. Dip position down is ON and position up is OFF.
After each Dip-switch-change a power-reset of the Can-box has to be performed!
See the following chapters for detailed information.
1.4.1.1.
Enabling the interface’s video inputs (dip 2-3)
Only the enabled video inputs can be accessed by switching through the interface’s video
sources. It is recommended to enable only the required inputs, because the disabled inputs
will be skipped while switching through the video interfaces inputs.
1.4.1.2.
Rear-view camera setting (dip 5)
If set to OFF, the interface switches to factory LVDS picture while the reverse gear is engaged
to display factory rear-view camera or factory optical park system picture.
If set to ON, the interface switches to its rear-view camera input while the reverse gear is
engaged.
Note: Dip 1, 4, 6, 7 and 8 are out of function and have to be set to OFF.
Dip
Function
ON (down)
OFF (up)
1
No function
set to OFF
2
CVBS AV1-input
enabled
disabled
3
CVBS AV2-input
enabled
disabled
4
No function
set to OFF
5
Rear-view cam type
after-market
factory or none
6
No function
set to OFF
7
No function
set to OFF
8
No function
set to OFF
Содержание VL1-TOM
Страница 7: ...Version 08 08 2022 HW 16 V65 VL1 TOM Page 7 2 2 Connection schema...
Страница 9: ...Version 08 08 2022 HW 16 V65 VL1 TOM Page 9 2 4 Installation daughter PCB...
Страница 10: ...Version 08 08 2022 HW 16 V65 VL1 TOM Page 10...
Страница 11: ...Version 08 08 2022 HW 16 V65 VL1 TOM Page 11...