Version 08.08.2022
HW: 16 (V65)
VL1-TOM
P
a
g
e
8
2.3.
Connection – 6pin interface cable
Connect the white female 6pin connector of the 6pin interface cable to the male 6pin
connector of the video interface.
Connect the black wire of the 6pin interface cable to vehicle ground.
Connect the
yellow
wire of the 6pin interface cable to +12V battery (300mA).
Connect the
red
wire of the 6pin interface cable to +12V ACC terminal 15.
If desired, the
white
wire of the 6pin interface cable can be used alternatively to the
external button to switch the video sources (12V pulse for 2-3 seconds).
Connect the
green
wire of the 6pin interface cable to +12V of the reverse gear signal.
(e.g. reversing light).
Note: The connection of the
green
wire (Reverse signal) will be described in chapter
“After-market rear-view camera”. The white wire, can be used by +12V impulse to
switch the enabled video sources , same as the keypad (see chapter “video interface-
operation”).
Содержание VL1-TOM
Страница 7: ...Version 08 08 2022 HW 16 V65 VL1 TOM Page 7 2 2 Connection schema...
Страница 9: ...Version 08 08 2022 HW 16 V65 VL1 TOM Page 9 2 4 Installation daughter PCB...
Страница 10: ...Version 08 08 2022 HW 16 V65 VL1 TOM Page 10...
Страница 11: ...Version 08 08 2022 HW 16 V65 VL1 TOM Page 11...