User’s manual MN7 PDA
- 22 -
Navigation
1a Select whether you would like to enter the street first and then the
location (Street First), or first the location and then the street (City
First).
Note:
The following description is based on City First as the order
for entering the address.
The
A
DDRESS
window opens.
2. Enter the name or the postal code of the destination town.
3. Enter the name of the destination street.
4. Enter the house number. If you do not know the house number,
then leave this box empty.
If you don't know the house number but know the name of a nearby
side street, then tap on the Cross Street box and enter the name of
this street. The navigation system will calculate a route to the
intersection of the streets you have entered.
Note:
It is not necessary to enter all the address details.
If you specify the town only, the navigation system will calculate a
route to the town centre.
If you specify only the town and street without specifying a house
number or cross street, the navigation system will calculate the best
route to this street.
5. Tap on Start Navigation.
Sometimes the destination cannot be found exactly because, for
example, the entered combination of place and street name exists
several times.
In this case a window will open with a list of all the addresses
matching your entry plus additional information.
If the entered house number is not included on the map, the window
will show an address with the house number closest to the one
entered.
►
Tap on the address to which you want to navigate.
The map opens in
Preview
mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
chapter "Starting navigation" on page 28. Please read on there.
4.2.3
Points of interest
Points of Interest, also called POI (
P
oints
O
f
I
nterest) for short, are
useful addresses that are catalogued according to particular criteria.
