User’s manual MN7 PDA
Operating the navigation software
- 15 -
3
Operating the navigation software
3.1 Volume
The volume of the spoken driving instructions can be adjusted during
navigation.
You have started navigation. The map is open in
Navigation
or
Destination search
mode.
1. Tap
on
(Volume).
The volume bar opens. It contains three buttons for adjusting the
volume.
(Louder),
(Quieter),
(Volume on/off).
2. Tap
on
(Volume) again or wait a few seconds.
The volume bar closes.
3.2 Information
Symbols located at the top of the screen are used to display
information.
GPS
The GPS symbol can indicate the following GPS reception states:
No GPS
(No symbol): The built-in GPS receiver is not operational.
Contact customer service if the problem persists.
No Signal
: Data is being received from less than three satellites.
Position cannot be calculated.
GPS Ready
: Data is being received from at least three satellites.
Position can be calculated.
For details of the GPS status refer to chapter "GPS Status, saving the
current location" on page 45.
Energy
The Energy symbol can indicate the following states of the integrated
battery:
The device is being supplied by an external power source. The battery
is fully charged.
