User’s manual NAVIGON 25xx Explorer
- 16 -
Operating the NAVIGON 25xx
TMC (Traffic Info)
The
NAVIGON 25xx
has an integrated TMC receiver which provides
the navigation system with traffic information updates. If necessary it
can change your route dynamically, for example in order to avoid a
traffic jam.
Note:
This function is only available if TMC traffic messages are being
transmitted in the country in which you are travelling. This is not the
case in all countries.
The
TMC
symbol can display the following TMC reception status:
Tuning
(in red): The TMC receiver is operational but cannot find a
transmitter that is sending TCM signals. There are no active traffic
messages.
Tuning
: The TMC receiver is operational but cannot find a station that
is transmitting TMC signals. Traffic messages are active however. This
can be the case, for example, when travelling through a tunnel.
TMC on Standby
(in grey): Traffic messages can be receiverd.
Note:
The TMC antenna is integrated in the car charger cable. The
Tuning
symbol may still appear therefore when the car charger cable is
not connected to the
NAVIGON 25xx
.
For details of the TMC function refer to chapter "TMC (Traffic
Information)" on page 74.
Energy
The
Energy
symbol can indicate the following states of the integrated
battery:
The device is being supplied by an external power source. The battery
is fully charged.
- or -
The battery cannot be charged because its temperature is too high or
too low.
The device is being supplied by an external power source. The battery
is being charged.
The device is being supplied by its internal battery. The battery charge
is sufficient.
The device is being supplied by its internal battery. The battery charge
is low.