NAVC-817D
USER MANUAL
10
Navc-817D Manual Ver 2.3 06/2017
Installation the Front Camera
The NAVC-817D works best when mounted centrally and high up on the windscreen
(typically behind or close to the rear vision mirror for the front camera). Use the supplied
windscreen suction mount to affix the NAVC-817D to the windscreen and then adjust the
mount until you can see a clear view of the road ahead on the Monitor. Note: Be sure to
remove the plastic cover from the silicone suction pad and ensure the glass surfaces are
clean, dry and lint free.
Note: The above wiring diagram above is only a suggestion.
1) NAVC-817D device mounted behind the rear vision mirror.
2) Car charger cable routed behind rear vision mirror.
3) GPS antenna module discretely hidden behind sun visor
4) Cable hidden behind roof headlining.
5) Cable hidden behind “A” pillar – beware of airbag equipped cars.
6) Cable is routed beside the dashboard/near the door hinges.
7) Cable is passed under the passenger carpet (or under the dashboard).
8) Car charger plug is connected to the car’s “cigarette socket”.
