manualshive.com logo in svg

Navien NCB-24LDWE, Руководство по установке и эксплуатации

Поделиться
Скачать
Navien NCB-24LDWE Скачать руководство пользователя страница 40

40        

O

perating the Boiler

10.2    Adjusting the Temperature

10.2.1    Adjusting the Space Heating Temperature

To adjust the heating te

m

perature:

1.  Press the Space heating button. The space heating 

te

m

perature will flash.

2.  Press the + (Up) or – (Down) buttons until the desired 

te

m

perature appears on the display.

You can adjust the te

m

perature while the display is flashing. 

I

f no buttons are pressed for 5 seconds or if the EC

O

 button 

is pressed, the current te

m

perature setting will be stored 

auto

m

atically.

Note

 

Ɣ

Take note of the original heating te

m

perature in 

case you want to restore it to the default.

 

Ɣ

The default space heating te

m

perature range is 

40°C to 90°C.

 

Ɣ

The boiler will retain your settings during a power 
outage.

10.1    Turning the Boiler On or Off

To turn the boiler on or off, press the Power button.

When the power is on, the water te

m

perature of the space 

heating supply will appear on the front panel display.

Note

When displaying the water te

m

perature of the space 

heating supply, the space heating icon turns on.

10.    Operating the Boiler

Содержание NCB-24LDWE









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды