© Nauto 2019. All Rights Reserved.
16
Installation
|
Mark Button
The Mark Button is a Bluetooth device included with every Nauto
Device. The button is designed to enable drivers to initiate uploads
of video to the cloud.
1. Turn Mark Button ON.
Locate the switch on the back side of the device and toggle it to the “On”
position. It may take up to 30 seconds for the Mark Button to connect to the
Nauto Device via Bluetooth.
2. Confirm connection.
Review the LED light on the Mark Button when pressed. A green LED should
activate upon press.
a. If the LED begins blinking, the Mark Button has not been paired correctly.
You will need to activate manual pairing by pressing both volume buttons
on the Nauto Device for at least 5 seconds, or until the LED lights on the de-
vice flash blue. The Nauto Device will then search for a Mark Button to pair
with. Confirm the connection by pressing the Mark Button until the green
light no longer blinks.
3. Attach the Mark Button.
Using the provided Velcro, attach the Mark Button to the vehicle. Consult the
fleet manager for preferred Mark Button placement.
Mark Button
ON switch
