© Nauto 2019. All Rights Reserved.
11
Installation
|
Power Cable Connection
1. Locate the power end of the power cable, or the end with the small black block
(see image for reference).
2. Leaving 8-10” of the cable exposed, start tucking the cable under the windshield
headliner, starting just above the rearview mirror.
a. The cable should be buried under the headliner so that it will not slide out or
drop from the headliner.
3. Route the cable to the left (driver’s side of the vehicle) and remove the A-pillar
panel to route the cable around, behind, and away from all airbag components
and related vehicle accessories.
4. Pull the door gasket away from the body of the vehicle and run the power cable
into the channel near the pinch weld, but without crossing over the pinch weld,
towards the power supply unit.
5. Connect the white clip into the power supply. Bundle and secure all excess wiring
so it will not interfere with vehicle and driver controls.
6. Mount the power supply unit and bundled wires in a secure location under the
dash of the vehicle with zip ties.
a. The power supply is not waterproof and is intended to be placed inside of the
vehicle. It is not designed to be mounted externally or under the hood of a
vehicle.
Power end of power cable
Power Cable Connection
