© Nauto 2019. All Rights Reserved.
14
Installation
|
Device Installation
8. Mark location for the Nauto Device.
Using the live images as guidance, mark the location for the Nauto Device
on the windshield with tape or marker. For optimal device performance:
a. The forward-facing camera should have a clear view of the front of the
vehicle with no obstructions.
b. The forward-facing camera should not be blocked by window tint or metal
film found near the rearview mirror. If neither side of the rearview mirror
will produce the desired result, please contact Nauto for additional options.
c. The driver-facing camera should not be easily obstructed by the driver-side
visor.
d. The cameras should not block any sensors or rearview mirror functions.
9. Peel the liner from the adhesive on the windshield mount.
10. Slowly align the device into position.
Check the live images on the app. If your view is properly aligned, gently press
the whole assembly to the windshield.
11. Press and hold.
Press and hold the complete mount to the windshield for at least 15 seconds.
15 seconds is the minimum time for the adhesive to adhere properly. Failure to
properly secure the Nauto Device may cause it to detach from the windshield,
which may lead to catastrophic damage or injury.
12. Verify the mount and Nauto Device are securely attached.
13. Secure all dash panels.
Make sure all cables are secure and out of the driver’s view and movement.
Interior view of Nauto Device
Exterior view of Nauto Device
