© Nauto 2019. All Rights Reserved.
13
Installation
|
Device Installation
1. Connect the Nauto Device to power.
Insert the power cable end that extends from under the headliner into the
device’s power port. The Nauto Device will now boot up.
2. Check for green lights on the device.
This can take up to one minute. Blue lights will appear on the device first,
meaning the device is updating software, followed by two green lights.
3. Fit the windshield mount to the back of the Nauto Device.
Do not remove the adhesive backing at this time.
4. Review live images from the Nauto Device.
The Nauto Installer app will show live images from both interior and exterior
cameras. This can take a few minutes.
5. Determine the optimal mounting location.
This is based on the live images and recommended locations (see image on
right).
6. Locate the small screw on the accessible side of the device.
Find this on the exposed side from the rearview mirror. Rotate the T5 screw
clockwise to lock the Nauto Device into place. The other screw will not be
tightened.
7. Clean the desired location using the provided swab.
Dry the area with a clean paper towel, removing all film and residue.
Device lights guideline
Recommended mounting locations
Live images screen
