Page 7
7.
Insert one tie rod assembly into the
cross-member tube set into place
in Step 4.
8.
Insert the second tie rod assembly
into the gap between the rear and
center platform sections.
Fig. 11
9.
Slide the left side trim tube onto the
rear tie rod assembly then install
the left side frame tube over the
ends of the tie rods.
10.
Repeat Step 9 for the right side trim
tube.
Fig. 12
11.
Use a 5/8” open-ended wrench
to secure the front cross-member
tube to the center platform section
using one (1) piece each of the
7/16”-14 x 5” hex head screw and
7/16” fl at washer.
Fig. 13