6
Installation Procedure
Step 1 Remove the Console
Tools Needed:
Phillips Head Screwdriver
1-1
Use a Phillips Head Screwdriver to remove the
four screws that secure the Console.
Tools Needed:
Wire cutter or similar
2-1
Locate the LCD wires inside the mast. (Figure a)
2-2 Remove the wire tie. (Figure B)
2-3 Extend approximately 1” of the LCD wires.
(Figure C)
Step 2 Locate the LCD wires and remove the wire tie.
Phillips Head Screw
Figure a
Figure B
Figure C
LCD Wires
Wire Tie
Extend 12” of Wire
