10
Installation Procedure
Step 7 Attach the LCD Monitor
Tools Needed:
6mm allen wrench
7-1
Position the LCD monitor on the Bracket (Figure a)
with the metal Tabs resting between the upright
prongs discussed in Step 6. (Detail a)
7-2 Install the m10 allen Bolts and Lock Washers.
(From Hardware Kit)
7-3 Position the LCD monitor. (Figure B & C)
Note:
The Monitor has a 30º range of
viewing angles. Position at your dis-
cretion
(Figure B & C).
7-4 Completely tighten the m10 allen Bolts.
Figure a
Detail a
LCD Monitor
Bracket
Metal Tab
Prong
30º Range
30º Range
Figure B
Figure C
