7
Nautilus
®
LCD Installation
Installation Procedure
Step 3 Place Spacer between Console and Mast
Tools Needed:
Phillips Head Screwdriver
4-1
Use a Phillips Head Screwdriver to
remove the four screws and washers
securing the Back Cover to the Bracket.
Step 4 Remove the Back Cover of the LCD Bracket
3-1
Place the Spacer (Figure a) between the Console and
mast as shown. (Figure B)
3-2 allow the LCD wires to extend through the gap
between the Spacer and the Console, and over
top of the mast. (Figure C)
3-3 Leave the Console in place on the mast but
do not install the hardware at this time.
Figure a
Spacer
Spacer
Console
Mast
Spacer
Console
Mast
LCD Wires
Figure B
Figure C
Back Cover
Bracket
Phillips Head Screw
