ASSEMBLY GUIDE
Step 2:
Locate the following for this step:
Parts:
s
Display Console (A)
Hardware:
s
Ref #5 Phillips Head Screw 1/4”x20 Qty. 4
s
Ref #6 Spring Washer M6 Qty. 4
Tools:
s
Phillips Head Screwdriver
3-1 Plug the Main Console Wire (Q) into the large
Connector (J5 ) on the back of the Console.
(Figure 4)
3-2 The Right Heart Rate Wire (O) is labeled with an “R”.
Plug the Right Heart Rate Wire into the connector
labeled P1 on the back of the console. (Figure 4)
3-3 Plug the Left Heart Rate Wire (P) into the P2
connector. (Figure 4)
NOTE: If installing the optional LCD Monitor refer
to the NV915 installation manual at this
time. If not installing the LCD Monitor, tuck
the TV Cables (S) into the Mast.
3-4 Align the Console with the Mast, install two screws
only.
Figure 3:
A
O
S
P
5
Q
6
Figure 4:
P1
P2
J5
9
