Step 4:
Locate the following for this step:
Parts:
s
Seat Pad
Hardware:
s
Ref #
11 Hex Head Bolt M8 x 20 Qty. 4
s
Ref #
9 S.S. Flat Washer M8.5 Qty. 4
Tools:
s
6mm Hex Wrench
6-1 Carefully Align the Seat Pad with the
Seat Carriage (T).
6-2 Install and completely tighten the hardware.
Note:
Use caution during this step as the Seat
Assembly is not yet secured to the Seat
Carriage. It is easier to perform this step if the
Carriage is positioned toward the top of the
range.
6-3 Connect the Heart Rate Cables (U) from the
Handlebars to the corresponding connectors
exiting the Seat Carriage (Figure 6).
6-4 Carefully place excess cable from Contact Heart
Rate cables in between the Seat and and the Seat
Carriage (Figure 6).
Note:
To avoid damage to the Heart Rate Cables,
Do Not apply excessive force to the cables
while assembling connectors.
Figure 6:
U
T
ASSEMBLY GUIDE
11
9
12
