Step 1:
Locate the following for this step:
Parts:
s
Console Mast (B)
Hardware:
s
Ref #1 Allen Head Bolt M10x25 Qty. 4
s
Ref #2
Spring Washer
M10
Qty. 4
s
Ref #3 Flat Washer M10 Qty. 4
Tools:
s
8mm Allen Wrench
1-1 Connect the attached long Wire Tie (L) to the
main and TV cables (M) and use it to pull the
cables up through the Mast (B). Make sure to
reposition the wire tie after the rework.
1-2 Align the Mast (B) with the four holes in the Main
Frame. (N)
1-3 Install and hand tighten the hardware.
The following instructions provide direction in assembling the base unit for the Nautilus® Commercial Series Bike model
R916. All instructions in the manual are given with the orientation of sitting on the bike facing the console. The console is
the front, while the seat is the back.
ASSEMBLY WITH SEAT CARRIAGE AND BRAKE
Figure 1:
B
L
M
N
1
2
3
8
