Nautel VR-Link, Техническое руководство по эксплуатации

Страница: 51 / 58

VR-Link Technical Instruction Manual
Page 7-1
Section 7 Wiring Lists Issue 0.6
VR-Link
TECHNICAL INSTRUCTIONS
Section 7 WIRING LISTS
7.1 INTRODUCTION
This section contains wiring information for
hard-wired assemblies of the subject unit.
Refer to Table 7-1 for an itemized listing of
assemblies that have wiring lists.
7.2 WIRING LISTS NOT PROVIDED
Separate wiring lists are not provided for
some assemblies. These assemblies
include:
Assemblies that have separate maintenance
manuals are not provided. Refer to the
associated maintenance manual for detailed
wiring information of these assemblies.
Assemblies that have their wiring information
adequately depicted/ tabulated on their
assembly detail drawings are not provided.
Refer to the associated assembly detail
drawing for detailed wiring information of
these assemblies.
7.3 PRINTED WIRING PATTERNS
The need for printed wiring pattern
information is beyond the scope of this
manual, therefore, detailed printed wiring
patterns for printed circuit boards are not
included.
7.4 WIRE COLOURS
Every effort is made to manufacture the
assemblies using wire that is the colour
tabulated in the 'Code' column of the wiring
list tables. In some instances, a white wire
will be substituted. In this case identification
must be determined by locating the assigned
identification number.
7.5 WIRING LISTS PROVIDED
The wiring lists tabulated in Table 7-1 are
provided. These lists provide, non-printed
wiring pattern, point-to-point (source/
destination) inter-connecting information.
Table 7-1:
Wiring Lists Provided
TABLE TITLE
Table 7-2 Wiring List – NAX245 VR-Link RCMS Interface Unit
Table 7-3 Connector Mating Information – VR-Link