Nautel VR-Link, Техническое руководство по эксплуатации

Страница: 37 / 58

VR-Link Technical Instruction Manual
Page 3-11
Section 3 Operating Instructions Issue 0.6
3.5 NETBURNER SOFTWARE
UPGRADE
The Netburner software is upgradeable
using the following procedure:
NOTE
The logged in user must have both
Administration and Site permissions to
perform a software upgrade.
•
Obtain the appropriate software
upgrade file from Nautel.
•
Open an FTP session between the
computer with the upgrade file and the
Netburner module. Terminal settings
are listed in 2.4 step (b). Follow the
steps shown in the typical FTP session
(see Figure 3-9, use the IP address
programmed into the Netburner).
•
Upload the file to the Netburner.
•
Close the FTP session.
Figure 3-9 illustrates a typical FTP session
run from the Windows command line.
Other FTP clients such as Ipswitch WSFTP
(see Figure 3-10) may be used instead of
the command line type FTP application.
The Netburner will re-boot upon closing
the FTP session and will restart running
the upgraded software.
Unless specifically mentioned in Nautel’s
release notes, a software upgrade will not
result in the loss of any previously entered
equipment or user information.
Figure 3-9: Typical FTP Session