Nautel VR-Link, Техническое руководство по эксплуатации

Страница: 30 / 58

Page 3-4
VR-Link Technical Instruction Manual
Issue 0.6 Section 3 Operating Instructions
The automatic refresh on status pages
means that a user will only be logged off by
selecting the Logout link on the left side of
the page (or if a user at another site logs in
using the same username/password). On
any other page, lack of user activity of 30
minutes will cause an automatic logout.
Selecting the “Event Log” tab displays the
equipment events log (see Figure 3-2).
Each log in the list shows the timestamp
and type. Clicking on a log changes all of
the data on the status pages to show
logged data instead of live data.
When viewing log data, the “Live Status”
tab will appear. Clicking this tab will change
the data in the status pages to live data. The information line above the status page
tabs will indicate that logged data is being
shown along with log timestamp and type.
NOTE
Controls cannot be used when logged
data is shown.
Selecting the “Save” tab allows a snapshot
of the event log to be saved, at its current
state (see Figure 3-3). The file may be
saved as plain text on the disk of the
machine being used to browse the device,
or sent to an email recipient.
Figure 3-2: Event Log Page
Figure 3-3: Save Page