natus Nicolet Viking EDX, Руководство пользователя

Страница: 28 / 94

Nicolet EDX
2-8 January 30, 2020
Synergy EDX control panel
The Synergy EDX control panel provides a single control operation for setting essential parameters during a
patient examination. The mouse is not active. You should use a mouse connected to the USB port of the
computer.
The control panel is active in all Synergy EDX software modes. However, it is not active in NicVue, the Backup/
Restore mode, the Report Program, the internet, or in any Windows application. In these modes, use the mouse
or keyboard.
Adjustment dials
The adjustment dials include the Volume , Sensitivity , Sweep Duration , Stim A (IES-1 amplitude), Stim B
(IES-2 amplitude), and Stim Duration and Stimulus Level dials located on the upper right.
A
Volume Rotate to change the level of the audio output of the input signal. Set it to zero
for no audio output.
B
Sensitivity Rotate to adjust the display sensitivity of the selected trace or traces. If no trace
is selected (to deselect a trace, click away from it), the sensitivity of all the
traces in the current test is changed.
C Erase Press to erase the selected trace or traces to collect a fresh set of data in the
same store.
D Sweep Duration Rotate to adjust the acquisition sweep duration for the active trace(s). Once data
has been acquired, you can also increase or decrease the sweep duration for
selected traces.
E
F
Acquire On/Off
Acquire Single Press to set Acquire ON. Press again to set Acquire OFF.
Press once to deliver a stimulus and acquire a response. If you hold down this
button for more than 1 second, Acquisition is locked on. Press again to stop
Acquisition.
!
B
I
MPORTANT:
The Electrical Stimulator outputs are disabled when
the Synergy EDX Control Panel is connected to an
EDX Unit.
V
mA
ms s
B
A
V
mA
M-
M+
M
uV/DIV
Fn1
Fn2
S1 S2
A S S S S
S
S
B C D E F G H
I
J K L M N O P
Q
R
!
B
uV/DIV
M-
ms-s
M+