natus Nicolet Viking EDX, Руководство пользователя

Страница: 50 / 94

Nicolet EDX
2-30 January 30, 2020
Setting individual
channels on the
Acquisition Setup
panel
This procedure sets changes made on the Acquisition Setup panel only to the
selected channel. See
Note 1 below Figure 2 on the previous page.
1. Click on Ch. , Low , or High
.
2. Click on the Channel tab
(e.g., Ch 1 , Ch 2 , Ch 3 , etc.)
you want to edit.
3. Make your changes and click OK .
Changes you made are applied only to the selected channel.
Setting all channels on
the Acquisition Setup
panel
This procedure sets changes made on the Channel 1 tab to all of the channels.
See Note 1 below Figure 2 on the previous page.
1. Click on Ch. , Low , or High
.
2. Click on the Channel 1 tab.
3. Make your changes and click Apply to all (see i n Figure 2 earlier in
this chapter).
4. Click OK .
Changes you made on Channel 1 are applied to all of the channels.