natus Nicolet Viking EDX, Руководство пользователя

Страница: 82 / 94

Nicolet EDX
5-10 January 30, 2020
Calculating
Conduction Velocities
To calculate and display the conduction velocity of specific segments:
Measuring patient
temperature
If enabled, the system enters the patient’s temperature automatically on the trace
or segment table during acquisition.
1. Click Edit > Site Setup .
2. Check the Velocity checkbox(es) to select which segments
will display the velocity in the Segments results table.
3. Click OK .
4. Type in the distance for each of the sites for which you
want to view the Velocity values.
1. Secure the temperature probe to an appropriate location on the
patient’s skin.
2. Connect the temperature probe to the amplifier.
3. Use either method below to display the Results Table Setup
panel.
a. Click Edit > Results Table Setup .
b. Click on any results value column heading on the
Results Table (e.g., Distance mm, Lat Diff ms, etc.).
4. Click on an empty field’s Show Menu button ( A ) below.
5. Click on Temperature . The selected field now reads
Temperature.
6. To move Temperature to a different column location in the
Segment table, click the Up or Down Arrow ( B ).
7. To remove a column from the Results tables, click on the
corresponding number and click the Minus button ( C ).
8. The Plus button ( C ) inserts an empty field above the
currently selected field.
9. Click OK when done.