3 Components and User Controls
3.1 Light Enclosure and Roll Stand
The neoBLUE LED Phototherapy System includes the components shown in
the following figure.
Main Device Components
Light Enclosure:
The light enclosure can be tilted by grasping the device on
either side and torquing to desired angle. Use an allen wrench to adjust the
tension of the roll stand/enclosure attachment to facilitate positioning. To
remove the light from the roll stand, loosen the top two thumb screws and lift
the enclosure up and away from the roll stand.
Lens:
The lens is a plastic shield that protects the baby and the unit from
incidental debris or fluids.
Height Adjustment:
This knob allows you to adjust the height of the light
enclosure. First loosen the knob, then adjust the height of the light enclosure,
and finally tighten the knob to lock the height.
Proximity Adjustment:
This knob allows you to adjust the distance between
the light enclosure and the roll stand post. To adjust, loosen the knob, adjust
the position of the light enclosure, and then tighten the knob once the desired
distance is achieved.
Locking Casters:
Once the light is in place for phototherapy, these casters
should be locked to prevent the light from rolling around freely. Casters lock
and unlock with slight foot pressure on the locking tab.
neoBLUE
®
LED Phototherapy System User Manual
9
PN 001364 Rev. I
Содержание neoBLUE
Страница 1: ...User Manual...
