Roll Stand Base:
The low profile circular base is designed to prevent tipping
when the light is at any angle or distance from roll stand. Base fits under
standard incubators to allow easy placement.
3.2 Front Panel Controls
Front Panel Controls
Irradiance Level Control:
Use this switch to select between two intensity
settings. Low (
☀
) / High (
☀☀
).
On/Stand-by Switch:
Use this switch to turn the main power ON ( | ) or to
Stand-by (
). The switch is located in the front of the light enclosure
between the irradiance level control and target illuminate switch.
Target Illumination Switch:
To help center the light over the infant, press
this switch to project a red light over the centrally illuminated area.
3.3 Rear Panel
Power cord attachment
Timer
Timer:
The neoBLUE light is equipped with a timer to track the total number
of hours it is switched on. The timer will count up to a maximum of 99999.9
hours. The decimal point will be flashing at a steady rate when the timer is
counting. When the timer is not counting, the decimal point will not flash. The
timer will count any time the lighted green on/standby switch is in the on
position. The timer will count at the same rate regardless of the intensity
Fan inlet vents with filters
Passive air conduction vents
(along bottom sides, front,
and back edges)
neoBLUE
®
LED Phototherapy System User Manual
10
PN 001364 Rev. I
Содержание neoBLUE
Страница 1: ...User Manual...
