4 Assembly and Operating Instructions
Assembly
The neoBLUE system consists of two products shipped in two separate
boxes. One box contains the light enclosure and the other box contains the
roll stand (post/attachment arm and base).
To assemble the light, follow these steps:
1
Unpack the shipping boxes
. Check contents against the packing lists.
2
Refer to assembly instructions
enclosed in the roll stand box.
Operating Instructions
1
Check intensity.
Check the intensity of the light using a radiometer per
your institution’s procedures (see Section 6.1, “Checking the Light
Intensity”). The intensity of the light was factory calibrated to deliver
35 µW/cm
2
/nm at the
High
setting and 15 µW/cm
2
/nm at the
Low
setting
at a distance of 12 inches (30.5 cm) from the baby.
2
Prepare infant.
Infant may lie in an open crib, a bassinet, an incubator, or
under a radiant warmer.
Warning! Select only infants for whom phototherapy has been
prescribed.
3
Shield infant’s eyes
with protective eye shields designed for use during
phototherapy.
Biliband
®
Eye Protectors
Sizes: Micro (P/N 900644)
Premature (P/N 900643)
Regular (P/N 900642)
Warning! Eye Protection: Do not look directly into the LEDs.
During treatment, always protect the baby’s eyes with eye patches or
equivalent. Periodically and/or per your hospital protocol, verify that the
baby’s eyes are protected and free of infection.
4
Position light over infant.
Important! The light was factory calibrated with the
neoBLUE
®
Radiometer to deliver intensive phototherapy at a distance of 12 inches
(30.5 cm) from the baby. Refer to the Service Manual for information on
adjusting the intensity if using the light at other distances, and for
information on using other meters.
5
Switch on power,
using the power switch in the front of the light
enclosure.
Warning! Operator Safety: Sensitive individuals may experience
headache, nausea or mild vertigo if he/she stays too long in the irradiated
neoBLUE
®
LED Phototherapy System User Manual
12
PN 001364 Rev. I
Содержание neoBLUE
Страница 1: ...User Manual...
