Nature's Comfort NC-40, Инструкция по установке и эксплуатации

Страница: 4 / 26

Page 4 / 26
Stove Specifications
The NC-40 Pellet stove is an advanced design that utilizes individual fresh air intake and venting pipes. Negative
pressure burning technology creates high efficiency burning with very little ash in the exhaust. The advanced smart
controller shuts off the unit automatically if operated incorrectly or if out of pellets.
Model NC-40
Rated input BTU/h 43,500
Rating fuel consumption Lb/h 1.0 - 4.84 lb/h +/-5%
Heating area Feet² ~2000 (or more depending on insulation)
Rating voltage Volts 115
Rating frequency Hz 60
Rating power Watts/Amps <
＝
150/4.5
Hopper Capacity pounds 55
Venting pipe diameter Inch 3
Air input pipe diameter Inch 2
Unit size (wide x depth x height) Inch 26.75 x 25.5 x 39
Stove Dimensions
Part II - INSTALLATION
DO NOT INSTALL A FLUE DAMPER IN THE EXHAUST VENTING SYSTEM OF THIS UNIT. DO NOT CONNECT THIS
UNIT TO A CHIMNEY FLUE SERVING ANOTHER APPLIANCE.
CAUTION: DO NOT CONNECT TO ANY AIR DISTRIBUTION DUCT OR SYSTEM.
WARNING: DO NOT INSTALL IN SLEEPING ROOM
NATURE
’S COMFORT HAS NO CONTROL OVER THE INSTALLATION A STOVE AND GRANTS NO
WARRANTY IMPLIED OR STATED FOR THE INSTALLATION, MAINTENANCE OR PERFORMANCE A STOVE
AND THEREFORE ASSUMES NO RESPONSIBILITY FOR ANY CONSEQUENTIAL DAMAGE(S).