
2.
Press
F1
to select
FILTER
.
3.
Press the Left or Right Arrow button under the display to select the
FILETYPE
field at the
bottom of the display, then turn the Control encoder to select
PROJECT
. This indicates
the type of files that will be displayed.
4.
Press
F3
to select
USER
.
5.
Now press
F2
above the display to select the
LIST
(for “result list”).
6.
If you have already created more than one Project, turn the Control encoder until
MY
FIRST PROJECT
appears at the bottom of the display.
7.
Press the Control encoder to load the Project.
8.
Press
BROWSE
to leave the Browser.
The
BROWSE
button turns off.
→
You can continue to work on your tutorial Project.
You will note that every action you did on the controller is directly mirrored in the Browser of the
MASCHINE software. This is true in both directions.
3.2
Customizing Your Drum Kit
You might want to replace one or more drums from the Group “EK-TL A Kit” with ones that
sound better with your Pattern. To do this, you must make use of the Browser again.
Building Your Own Drum Kit
Customizing Your Drum Kit
MASCHINE MIKRO - Getting Started - 36
Содержание Maschine Mikro MK2
Страница 1: ...GETTING STARTED...