Native Instruments Maschine Mikro MK2 Скачать руководство пользователя страница 26

Страница: 26 / 181

Play along to the metronome to get a feel for the tempo.

If you’d like to increase or decrease the tempo to make your playing feel more comforta-

ble, press

MAIN

(at the bottom right corner of the display), then

(above the display),

then turn the Control encoder at the right of the display.

The tempo value is indicated in the display.

When you’re done, press

MAIN

again to deactivate it.

You can also adjust the volume of the metronome by pressing

SHIFT

GRID

and turning the Con-

trol encoder.

It is recommended that you to start with a simple sequence using a few Sounds only (e.g., the kick
and the snare on pads

and

). You will have the possibility to enrich your Pattern later.

To start the recording:
1.

With the sequencer playing, press

REC

to enter recording mode.

REC

lights up red.

Play the desired rhythm on the pads. By default, the recorded Pattern is one bar long.
Your playing is recorded and directly played in a loop. As long as you don’t press

PLAY

again, the new Pattern keeps playing.

Press

REC

again to stop recording.

→

You just created your first Pattern!

You can now deactivate the metronome by pressing

SHIFT

PLAY

again and listen to your

newly created rhythm.

►

To stop the sequencer, press

PLAY

again.

First Steps

Recording Your First Pattern

MASCHINE MIKRO - Getting Started - 26

Содержание Maschine Mikro MK2






















































































































































































Результаты поиска

Содержание Maschine Mikro MK2

Отзывы:

Бренды по названию

Популярные бренды

Native Instruments Maschine Mikro MK2, Начало работы

Результаты поиска

Содержание Maschine Mikro MK2

Отзывы:

Бренды по названию

Популярные бренды