18
• Use of the EGT tools System can only be used, as specified above, for floors that are at least
4,250Psi (29Mpa) and are over 28 days old.
• As a general rule, it is best to inspect floor BEFORE beginning to note or mark obstacles such as
floor drains, protrusions from floor and elevation changes in excess of .08 in (2 mm).
• Any polishing project that is undertaken should ALWAYS be preceded by a mock-up of at least
100 SF (9 M
2
). This mock-up will serve two purposes: to provide a finished sample that owner can
approve and to verify the suitability of the EGT Diamond System for the given slab.
Machinery Qualifications
The EGT Diamond System is designed to attach to and work perfectly with any GP machine. Quantity
of EGT tools will vary by model:
• GP30: 12 pieces
Attachment of EGT tools #4 through #8 require Velcro pad adapters 401926 & 401925.
Densifier Qualifications
Manufacturer’s instructions for use must be followed exactly for best results and to avoid any costly
mistakes. Densifier must be the type that after its application, the floor is specified to be finished with a
dry system and no water whatsoever.
9.3
Polished Concrete - CLC Polishing System (Dry-Wet-Dry Steps)
The CLC Diamond System is a coordinated metal and resin bonded diamond system to perform
polished concrete using the GP30.
The CLC Diamond System is only to be used dry for step #1, wet for steps #2, #3 & #4 and dry for steps
#5, #6 & #7 and in sequence as numbered by tools #1 through #7. All tools are painted black or use
black Velcro to indicate a matched system.
CLC #1
1
#1 (401915) is a metal bond tool painted black that has pictured face design and can be
clearly identified by the number on back as “#1.” This tool features the patented EG attachment
system. The tool is run dry. Approximate life of #1 is 30,000 SF (2,787 M
2
).
CLC #2
2
#2 (401916) is a metal bond tool painted black that has pictured face design and can be
clearly identified by the number on back as “#2.” This tool features the patented EG attachment
system. The tool is run wet. Approximate life of #2 is 30,000 SF (2,787 M
2
).
CLC #3
3
#3 (401917) is a 3” resin bonded tool that has the pictured face design and can be clearly
identified by the number on back as “#3.” This tool features black Velcro backing. The tool is
run wet. Approximate life of #3 is 15,000 SF / 1,394 M
2
.
CLC #4
4
#4 (401918) is a 3” resin bonded tool that has the pictured face design and can be clearly
identified by the number on back as “#4.” This tool features black Velcro backing. The tool is
run wet. Approximate life of #4 is 15,000 SF (1,394 M
2
).
