19
CLC #5, #6, & #7
5
7
6
#5 (401919), #6 (401920) & #7 (401921) are 3” resin bonded tools that each have
the pictured face design and can be clearly identified by the number on back as “#5”,
“#6” & “#7.” These tools feature black Velcro backing. The tool is run dry.
Approximate
life of #5 & #7 is 12,000 SF (1,115 M
2
) each. Approximate life of #6 is 10,000 SF
(930 M
2
) each.
Execution of CLC Polishing System
1. Attach the CLC #1 tools to the machine and place it in operating position. Attach appropriate power*
and dust collection hose to the machine. With 50% of weights on head of machine and 50% in basket
over wheels, set speed to 35Hz on VSD and start machine. Upon satisfactory completion of step #1,
remove machine from area and use a dust collector to clean the surface.
2. Attach the CLC #2 tools to the machine and place it in operating position. Attach appropriate power*
to the machine. With 50% of weights on head of machine and 50% in basket over wheels, set speed
to 45Hz on VSD and start machine, add water and start the machine. Upon satisfactory completion of
step #2, remove machine from area and wet vacuum or auto-scrub the concrete clean.
3. Attach the CLC #3 tools to the machine and place it in operating position. Attach appropriate power* to
the machine. With 50% of weights on head of machine and 50% in basket over wheels, set speed to
45Hz on VSD, add water, and start machine. Upon satisfactory completion of step #3, remove machine
from area and wet vacuum or auto-scrub the concrete clean.
4. Attach the CLC #4 tools to the machine and place it in operating position. Attach appropriate power*
to the machine. With 50% of weights on head of machine and 50% in basket over wheels, set speed
to 45Hz on VSD and start machine, add water and start the machine. Upon satisfactory completion of
step #4, remove machine from area and wet vacuum or auto-scrub the concrete clean.
5. Attach the CLC #5 tools to the machine and place it in operating position. Attach appropriate power*
and vacuum dust collection hose to the machine. With 100% of weights on head of machine, set
speed to 50Hz on VSD and start machine. Upon satisfactory completion of step #5, remove machine
from area and use a dust collector to clean the surface.
6. Apply densifier per manufacturer’s recommendations and allow surface to dry completely after
densifier process has been completed. See Section 3 for further information about densifiers.
7. Attach the CLC #6 tools to the machine and place it in operating position. Attach appropriate power*
and dust collection hose to the machine. With 100% of weights on head of machine, set speed to 50Hz
on VSD and start machine. Upon satisfactory completion of step #6, remove machine from area and
use a dust collector to clean the surface.
8. Attach the CLC #7 tools to the machine and place it in operating position. Attach appropriate power*
and dust collection hose to the machine. With 100% of weights on head of machine, set speed to 50Hz
on VSD and start machine. Upon satisfactory completion of step #7, remove machine from area and
use a dust collector to clean the surface.
Qualifications
As a general rule for all operations using the GP machines:
• The machine manual MUST be read and understood by any operator for the safe and productive
use of the machine.