National Instruments Two-Slot Embedded Controller NI PXI-8183 Скачать руководство пользователя

Страница: 49 / 69

Chapter 4

Common Configuration Questions

NI PXI-8183 User Manual

4-8

ni.com

How do I flash a new BIOS?

For information on updating the BIOS, refer to KnowledgeBase
2GIGKD0Z at

ni.com/support

Where do I get the latest software drivers?

You can download the latest drivers from

ni.com/support/

pxisupp.htm

My NI PXI-8183 does not have an internal floppy drive. Is there a way
to use an external drive?

Yes. The NI PXI-8183 controllers support and can boot from USB floppy
drives. Refer to the

Boot Options

section for more information.

A USB floppy drive is available from National Instruments, part number
778492-02.

The LPT port on the NI PXI-8183 also can be configured through the
BIOS setup for floppy signals instead of LPT signals. Refer to Chapter 3,

I/O Information

, for the floppy drive pinout.

PXI Configuration

How do I use the SMB trigger on the front panel?

For details, refer to the

PXI Features

section of Chapter 2,

Installation and

Configuration

Why doesn’t the NI PXI-8183 work with the PXI-8220?

A serialized IRQ conflict with the PXI-8220 and the NI PXI-8183 prevents
PC cards using ISA interrupts from working with the NI PXI-8183
controllers. The PXI-8221 is designed to work with the NI PXI-8183
and should be used instead.

Содержание Two-Slot Embedded Controller NI PXI-8183






































































Результаты поиска

Содержание Two-Slot Embedded Controller NI PXI-8183

Отзывы:

Похожие инструкции для Two-Slot Embedded Controller NI PXI-8183

Бренды по названию

Популярные бренды

National Instruments Two-Slot Embedded Controller NI PXI-8183, Руководство пользователя

Результаты поиска

Содержание Two-Slot Embedded Controller NI PXI-8183

Отзывы:

Похожие инструкции для Two-Slot Embedded Controller NI PXI-8183

Бренды по названию

Популярные бренды