![background image](http://html1.mh-extra.com/html/national-instruments/sa1000x/sa1000x_manual_3624898008.webp)
Maintenance
To clean the exterior of the probe, use a soft cloth moistened with either distilled
water or isopropyl alcohol. Allow the probe to dry completely before use.
Specifications
Definitions and Conditions
Specifications are typical and are published as general information to the user.
Specifications are valid under the following conditions unless otherwise noted.
■
SA1000X warmed up for at least 30 minutes
■
Environmental conditions within the probe's specified limits
Electrical Specifications
Attenuation ratio
10:1, ±0.5% (DC)
Dynamic measuring range
±8 V
Bandwidth (probe only)
1.0 GHz
Maximum rated input voltage
20 V
Notice
Applying input voltages outside the specified limits can destroy
the probe's amplifier.
■
To counter harmonic distortion and avoid input linearity errors, the
maximum amplitude of the input signal should not exceed the dynamic
measuring range limits stated by
.
ni.com
8
SA1000X Safety, Environmental, and Regulatory Information