2-32
|
ni.com
Chapter 2
Installation and BIOS Setup
Memory Corrected Error Enabling
Select
Enable
for the BIOS to correct a memory error if it is correctable. The options are
Enable
and
Disable
.
Note
Available when the item above Runtime Error Logging Support is set to
Enable
.
PCI-Ex (PCI-Express) Error Enable
Select
Yes
for the BIOS to correct errors occurred in the PCI-E slots. The options are
Yes
and
No
.
Memory Correctable Error Threshold
Use this item to enter the threshold value for correctable memory errors. The default setting is
10
.
Erasing Settings
Erase Event Log
Select
Enabled
to erase all error events in the SMBIOS (System Management BIOS) log before
an event logging is initialized at bootup. The options are
No
and
Yes
.
When Log is Full
Select
Erase Immediately
to immediately erase all errors in the SMBIOS event log when the
event log is full. Select
Do Nothing
for the system to do nothing when the SMBIOS event log
is full. The options are
Do Nothing
and
Erase Immediately
.
SMBIOS Event Log Standard Settings
Log System Boot Event
Select
Enabled
to log system boot events. The options are
Disabled
and
Enabled
.
MECI (Multiple Event Count Increment)
Enter the increment value for the multiple event counter. Enter a number between 1 to 255.
The default setting is
1
.
METW (Multiple Event Count Time Window)
This item is used to determine how long (in minutes) should the multiple event counter wait
before generating a new event log. Enter a number between 0 to 99. The default setting is
60
.
Note
Please reboot the system for the changes to take effect.
View System Event Log
This item allows the user to view the event in the system event log. Select this item and press
<Enter> to view the status of an event in the log.
Date/Time/Sensor/Type