National Instruments RMC-8357 Скачать руководство пользователя страница 39

Страница: 39 / 88

2-21

RMC-8357 User Manual

Port

~ Port 5 SATA Device Type

Use this item to specify if the SATA port specified by the user should be connected to a

Solid State drive or a Hard Disk Drive. The options are

Hard Disk Drive

and

Solid State Drive

sSATA Configuration

When this submenu is selected, the AMI BIOS automatically detects the presence of the SATA

devices that are supported by the SCU controller and displays the following items:

sSATA Controller

This item enables or disables the onboard SATA controller supported by the Intel SCU chip.

The options are

Enabled

and

Disabled

Configure sSATA as

Select

IDE

to configure an sSATA drive specified by the user as an IDE drive. Select

AHCI

configure an sSATA drive specified by the user as an AHCI drive. Select

RAID

to configure an

sSATA drive specified by the user as a RAID drive. The options are

IDE, AHCI,

and

RAID

If the item above "Configure sSATA as" is set to AHCI, the following items will display:

Support Aggressive Link Power Management

When this item is set to

Enabled

, the sSATA AHCI controller manages the power usage of the

sSATA link. The controller will put the link in a low power mode during extended periods of

I/O inactivity, and will return the link to an active state when I/O activity resumes. The options

are

Enabled

and

Disabled

sSATA Port 0

~ Port 3

This item displays the information detected on the installed sSATA drives on the particular

sSATA port.
•

Model number of drive and capacity

•

Software Preserve Support

sSATA Port 0

~ Port 3

Select

Enabled

to enable an sSATA port specified by the user. The options are

Disabled

and

Enabled

sSATA Port

~ Port 3 Hot Plug

This feature designates the sSATA port specified for hot plugging. Set this item to

Enabled

for

hot-plugging support, which will allow the user to replace an sSATA disk drive without shutting

down the system. The options are

Enabled

and

Disabled

sSATA Port

~ Port 3 Spin Up Device

On an edge detect from 0 to 1, set this item to allow the PCH to start a COMRE- SET

initialization to the device. The options are

Enabled

and

Disabled

Содержание RMC-8357

























































































Результаты поиска

Содержание RMC-8357

Отзывы:

National Instruments RMC-8357, Руководство пользователя, Страница: 39 / 88

Результаты поиска

Содержание RMC-8357

Отзывы: