© National Instruments
|
2-27
parity bit with your data bits in transmission. Select
Mark
to add a mark as a parity bit to be sent
along with the data bits. Select
Space
to add a Space as a parity bit to be sent with your data bits.
The options are
None, Even, Odd, Mark
and
Space
.
Stop Bits
A stop bit indicates the end of a serial data packet. Select
1 Stop Bit
for standard serial data
communication. Select
2 Stop Bits
if slower devices are used. The options are
1
and
2
.
Flow Control
Use this item to set the low control for Console Redirection to prevent data loss caused by buffer
overflow. Send a "Stop" signal to stop sending data when the receiving buffer is full. Send a
"Start" signal to start sending data when the receiving buffer is empty. The options are
None
and
Hardware RTS/CTS
.
VT
-
UTF8 Combo Key Support
Select
Enabled
to enable VT-UTF8 Combination Key support for ANSI/VT100 terminals. The
options are
Enabled
and
Disabled
.
Recorder Mode
Select
Enabled
to capture the data displayed on a terminal and send it as text messages to a
remote server. The options are
Disabled
and
Enabled
.
Resolution 100x31
Select
Enabled
for extended-terminal resolution support. The options are
Disabled
and
Enabled
.
Legacy OS Redirection Resolution
Use this item to select the number of rows and columns used in Console Redirection for legacy
OS support. The options are
80x24
and
80x25
.
Putty KeyPad
This feature selects Function Keys and KeyPad settings for Putty, which is a terminal emulator
designed for the Windows OS. The options are
VT100, LINUX, XTERMR6, SCO, ESCN,
and
VT400
.
Redirection After BIOS Post
Use this feature to enable or disable legacy Console Redirection after BIOS POST. When set to
Bootloader, legacy Console Redirection is disabled before booting the OS. When set to
Always
Enable
, legacy Console Redirection remains enabled when booting the OS. The options are
Always Enable
and
Bootloader
.