National Instruments RMC-8357 Скачать руководство пользователя страница 49

Страница: 49 / 88

2-31

RMC-8357 User Manual

TPM State

Select

Enabled

to use TPM (Trusted Platform Module) settings to enhance system data security.

Please reboot your system for any change on the TPM state to take effect. The options are

Disabled

and

Enabled

Pending Operation

Use this item to schedule a TPM-related operation to be performed by a security device for

system data integrity. Your system will reboot to carry out a pending TPM operation.

The options are

Enable Take Ownership

Disable Take Ownership

, and

TPM Clear

Note

Your system will reboot to carry out a pending TPM operation.

Current Status Information

This item displays the status of the TPM support on this motherboard.

ACPI Settings

WHEA Support

Select

Enabled

to support the Windows Hardware Error Architecture (WHEA) platform and

provide a common infrastructure for the system to handle hardware errors within the Windows

OS environment to reduce system crashes and to enhance system recovery and health

monitoring. The options are

Enabled

and

Disabled

Event Logs

Use this feature to configure Event Log settings.

Change SMBIOS Event Log Settings

This feature allows the user to configure SMBIOS Event settings.

Enabling/Disabling Options

SMBIOS Event Log

Change this item to enable or disable all features of the SMBIOS Event Logging during system

boot. The options are

Enabled

and

Disabled

Runtime Error Logging Support

Select

Enabled

to support Runtime Error Logging. The options are

Enable

and

Disable

. If this

item is set to

Enable

, the following item will be available for configuration:

Содержание RMC-8357

























































































Результаты поиска

Содержание RMC-8357

Отзывы:

National Instruments RMC-8357, Руководство пользователя, Страница: 49 / 88

Результаты поиска

Содержание RMC-8357

Отзывы: