Additional Error Codes
Code (hex)
Meaning
0
No detailed information on the cause of error.
10
Service parameter with invalid value.
11
Subindex not available
12
Object access is not a request
13
At least one reserved bit is set.
14
Subslot is not supported
15
Object access type not supported on this object.
16
Object access request index for this AccessType does not equal 0000hex.
17
Object access request length for this AccessType does not equal zero.
18
Object length for this object does not match
19
Object is ReadOnly and cannot be overwritten.
20
Service cannot be executed at present.
21
Due to local control, service cannot be executed at present.
22
Service cannot be executed in current device state (device control).
23
Service cannot be executed at present as no object dictionary is available.
30
Value range of a parameter out of range.
31
Parameter value too large
32
Parameter value too small
40
Collision with other values
41
Communication object cannot be mapped to the process data.
42
Process data length exceeded
80
Hardware error
81
Application failed
00A0
Invalid segment number, e.g., upload without initiation with subindex
==FFhex.
00A1
Resource not available; No more resources (memory) available for download.
REM-11180 User Manual
|
© National Instruments
|
25