National Instruments REM-11180, Руководство пользователя

Страница: 11 / 28

Diagnostic Registers
Table 8. Diagnostic Status Register
Bit Designation Meaning
00 F_PW_BIT
I/O warning
(peripheral
warning)
The device detected a warning at the I/Os.
01 F_PF_BIT
I/O error
(peripheral fault)
The device detected an I/O error
(peripheral fault).
02 F_BUS_BIT Bus error A bus error occurred.
03 F_CTRL_BIT Controller error The driver detected an internal error.
04 — — Reserved
05 F_RUN_BIT Run
Data cycles are being exchanged, output
data is enabled.
06 F_ACTIVE_BIT Active
The configuration is active, PDI to the
devices is possible, output data is disabled
(substitute value behavior).
07 F_READY_BIT Ready
The local bus master is ready for operation,
no data exchange over the bus.
08 F_BD_BIT Bus different
A device which does not belong to the
current configuration has been detected at
the last interface.
09 F_BASP_BIT SYS_FAIL
The controller is in the STOP state or no
application program has been loaded.
Output data is blocked (substitute value
behavior).
10 F_FORCE_BIT Force mode Force mode (start-up tool) is active.
11 to 15 — — Reserved
REM-11180 User Manual | © National Instruments | 11