CLIP Signal Name
Direction
Data Type
Description
LVDS output data or
acquiring the input
data. This clock can
be sourced from the
Si514 or from the
LMK04832 onboard
clocking ICs. Refer to
for additional
information.
TX/RX Delay Adjust
Steps
To CLIP
U16
Sets the number of
delay steps to apply
to the corresponding
TX/RX data line. This
delay is applied after
the corresponding
TX/RX Delay Adjust
Strobe is asserted.
The delay can only
be adjusted within
the allowable delay
limits of the FPGA.
Adjusting outside these
limits will not change
the delay on the
FPGA. Refer to the
TX/RX Delay Value Rd
signal description for
additional information.
TX/RX Delay Increment To CLIP
Boolean
TX/RX Delay Increment
values:
■
1—Increments
the line delay by
the number of
TX/RX Delay
Adjust Steps
when the TX/RX
© National Instruments
31
PXIe-6569 Getting Started Guide