background image

application development self-help resources to email and phone assistance from NI

Application Engineers.
Visit 

ni.com/services

 for NI Factory Installation Services, repairs, extended warranty,

and other services.
Visit 

ni.com/register

 to register your National Instruments product. Product

registration facilitates technical support and ensures that you receive important

information updates from NI.
A Declaration of Conformity (DoC) is our claim of compliance with the Council of the

European Communities using the manufacturer’s declaration of conformity. This

system affords the user protection for electromagnetic compatibility (EMC) and

product safety. You can obtain the DoC for your product by visiting 

ni.com/

certification

. If your product supports calibration, you can obtain the calibration

certificate for your product at 

ni.com/calibration

.

National Instruments corporate headquarters is located at

11500 North Mopac Expressway, Austin, Texas, 78759-3504. National Instruments

also has offices located around the world. For telephone support in the United

States, create your service request at 

ni.com/support

 or dial 1 866 ASK MYNI

(275 6964). For telephone support outside the United States, visit the Worldwide

Offices section of 

ni.com/niglobal

 to access the branch office websites, which

provide up-to-date contact information, support phone numbers, email addresses,

and current events.

ni.com

24

PXIe-8840 Quad Core

© 2022 National Instruments Corporation.

Содержание NI PXIe-8840

























Отзывы: